How to knit footprints with five knitting needles step by step instructions. We knit footprints for the house on two knitting needles

Beautiful slippers are knitted with a lazy jacquard pattern from yarn of two colors, an interesting bright pattern is obtained. The peculiarity of lazy jacquard is that one thread is used in the work, and the color changes after two rows. Many people prefer to knit footprints on two knitting needles, it is also convenient to use circular knitting needles connected by a fishing line.

A description of knitting footprints and a lazy jacquard pattern is given along with a photo.

To knit footprints, you will need 50 grams of acrylic yarn in two colors of your choice and knitting needles No. 3.5. If the yarn is thin, then knit the footprints with a thread in two additions.

According to this description, the footprints are obtained for a foot size from 38 to 40.

Start knitting from the cuff with an elastic band 1x1.

Cast on 71 sts on needles. Knit in straight and reverse rows, alternating 1 knit and 1 purl stitch. In the next rows, knit an elastic band according to the pattern, performing over the front loops - front, over the wrong - wrong. Rib knit for 5 rows.

The main part of the foot to the sole is knitted with a lazy jacquard pattern.. To knit the toe, mark the central loop - the 36th, from it in each front row to the left and right you need to add one loop, knitting them from the broach of the previous row.

Knit the central loop in the rows that you perform with a thread of the same color. When a row is knitted in a different color, the central loop is removed without knitting, while in the front row the working thread should pass behind it, and in the wrong side in front of the central loop.

Add loops before and after the center loop, regardless of the color of the thread. Include the added loops in the pattern in the following rows.

Knit lazy jacquard 2 rows (front and back) with one thread, then change color, pulling the second thread along the side and knit the next 2 rows with it.

For knitting lazy jacquard in the 1st row attach the thread of the second color and knit it: 3 p. front, 1 p. remove without knitting (working thread behind the loop). Repeat from * to the center loop, knit the second side of the pattern in a mirror image.

On the second row, knit all stitches., and the removed loops in the previous row, also reshoot without knitting, placing the working thread in front of the loop.

In the third row (the thread changes) knit 1, remove 1 loop without knitting (working thread behind the loop), * 3 front loops, remove 1 loop. Repeat from * to center loop, inc before and after center loop. Knit the second side in a mirror image, repeating from *.

Fourth (purl) row, knit all stitches, including the added loops, and reshoot the removed loops of a different color, moving the working thread forward.

Knit in a jacquard pattern with additions in the center of 38 rows.

We finish knitting the side part of the footprint and move on to the sole. Knit the next 4 rows without adding facial loops, completing 2 rows in one color and 2 rows in the second.

The first thread can be cut off and the tip fixed.

Knit with the second thread to the center and 5 more loops, knit the next 2 loops with a broach, i.e. Remove 1 loop from the left knitting needle, knit the second one and throw the first loop on the left knitting needle on the second.

Turn the work 1 p. Remove, knit 11 loops, knit 2 loops together purl.

Further knitting of the sole of the track is performed only on the central 11 loops, and the extreme loop is knitted together with the loop from the side on the wrong side 2 p. together with the wrong side, and on the front side 2 p. together with the front with a broach. After turning the work, the first loop is always removed, and the working thread is located in front of the work on the wrong side, and behind the work on the front side. So pigtails are knitted on the sides of the sole.

Every year sleds become more and more popular. They are used as home slippers, as it is convenient, practical and very beautiful.

If you want to learn how to knit beautiful footprints on two knitting needles, then this article will become your reliable assistant in this matter.

Also below you can find diagrams with a step-by-step description of the work.

How to knit footprints on two knitting needles: technology

There are many knitting technologies for footprints. For their execution, you can use four knitting needles, circular knitting needles, a hook. We will consider one of the simplest - footprints on two needles. Even a novice needlewoman can easily perform such work.

As for the knitting technology itself, there are three of them:

1. First provides for the beginning of knitting the product from the sock. The minimum number of loops is recruited, then with the help of the crochets, the number of loops increases.
2. Second- This is knitting from the upper part (heel), which goes down to the toe. Such footprints are knitted according to the principle of socks.
3. Third- transverse. With this technology, the footprint is knitted from one edge to the other, after which it is sewn.

Below we will consider different options for knitting footprints, and step-by-step instructions will help you complete the job without difficulty.

How to knit footprints on two knitting needles for beginners with a photo

We prepare the necessary equipment for knitting footprints. For work you will need:

• Thick yarn for the base.
• Thin yarn to decorate the teeth.
• Knitting needles No. 4 (in our case, circular).
• Needle and thread for stitching.

Let's get started:

1. Dial 87 loops, knit 10 of both facial and purl rows with facial loops, adding one loop at the end of each row. The result is 97 working loops.

2. Knit with knit, a row with a thin thread.

3. Make a cloves pattern. How to do it is shown in the video.

4. It turns out such a “leaky” part.

5. Fold it in half and, inserting the knitting needle into the lower loops (the photo shows which loops you need to pick up), collect the cloves.

6. Collect the cloves of the main color yarn.

7. Raise 8 rows with an elastic band 1X1.

8. From the edge of the knit, knit 30 loops with the main thread and insert a thin thread for the cloves, knitting and shaping them on the middle 37 loops.

It should turn out like this.

9. Collect the central teeth in the same way as described above.

10. We continue to work only on the tubercles.

11. Set aside 12 loops on both sides above the teeth. Knit the middle 13 with an elastic band 1X1, in each row connecting the last loop with one pending.

12. We form the front part of the trace. It should be such a sock.

13. Now make two rows according to the pattern throughout the work and finish knitting the trace.

14. Crochet the edge using a double crochet.

15. Such cool tracks are obtained.

How to knit cozy footprints on two knitting needles with a garter pattern?

How to knit footprints on two knitting needles: diagram and description

The easiest way to knit beautiful footprints on two knitting needles

It is very easy to make beautiful footprints. The main thing is to decide on an elegant pattern. Next, we perform the following actions:

1. We collect 13 loops on the knitting needles (on a small leg).
2. We knit 8 rows with a garter pattern.
3. Now we make an addition (yarn, front, nakid) every 5 knitted loops.
4. Purl row according to the drawing.
5. Now we make an addition before and after the already knitted crochets (yarn, knit 3, yarn over), repeating every 5 knitted loops.
6. Purl row according to the drawing.
7. Next, we continue to increase in the same order (yarn, knit 5, yarn over, etc.) until there are 39 loops on the needles.
8. We knit 15 loops and set them aside. Work continues only on 9 middle loops. They are knitted according to the heel rounding method, at the end of each row the last loop is knitted together with the last of the 15 laid off on both sides.
9. 9 working loops should remain on the knitting needles. Now on both sides of 9 loops we collect 18 loops. You should get 45 loops.
10. 45 loops are distributed as follows:
    - the first loop is edge;
    - five loops with a garter pattern;
    - one purl;
    - four front loops;
    - one purl;
    - 21 front loops;
    - now in reverse order: 1 purl, 4 facial, 1 purl, 5 garter, edge.
11. In this order, we knit 40 rows.
12. Now we perform the heel, using the same technique as the toe.
13. We perform the last 8-10 rows in garter stitch and close all the loops.

How to knit slippers on two knitting needles step by step?

How to knit footprints on two knitting needles with a Norwegian pattern: a master class

How to knit footprints on two knitting needles with a button?

1. On the knitting needles you need to dial 5 loops. Next - we knit with a garter pattern, adding one loop at the beginning and end of each front row.
2. Thus, we bring the number of loops to 25 pcs.
3. Now we distribute the resulting loops as follows:
   - edging;
   - one front;
   - * make two loops from one, knitting them on the wrong side;
   - *now from the next one make two facial ones;
   - ** repeat this increase until there are two loops left on the knitting needles, which are knitted: the first knit, the second purl.
4. Wrong side and then 30 rows knit according to the pattern 2X2.
5. Now we collect, as it was at the beginning, that is, we knit two facial loops into one, two wrong ones into one, etc.
6. It turns out a garter stitch. We knit, thus, decreasing at the end and beginning of each front row, one loop, until 5 working loops remain on the knitting needle.
7. From the five loops we raise the strap with a hole for the button at the end.
8. We fold the work, sew the sections knitted with an elastic band, and sew on a button.

How to knit footprints on two knitting needles: Julia Dolgova

Footprints knitted on two knitting needles without a seam: knitting technology with a photo

Don't know how to knit footprints without a seam? We offer a master class with step-by-step photos of footprints for a child of 3 years old. For work you will need:

• 50 g of yarn (the thread is folded twice);
• knitting needles No. 3;
• hook number 3.

The work is done as follows:

1. Cast on 28 loops. Knit 19 rows in stockinette stitch. Knit the heel, at the base of 8 central loops.

On each of the sides from the heel, dial 11 loops.

Raise 9 rows. Cast on 7 stitches at the end of the last row. Connect them with the opposite part to get circular knitting.

Distribute the loops on the knitting needles and pick up with the front surface. If desired, you can make a pattern on top of the trace.

When the main part reaches the little finger, start contracting. On each needle at the beginning of the row, knit 2 loops together until 2 loops remain on the needles. Pull a piece of yarn through them and pull off.

Crochet the edge and you can try on.

Save so you don't lose!

Not enough. How to knit footprints with knitting needles? Step by step instructions will help us with this.

Threads and knitting needles

For each piece of clothing, it is best to choose a separate material. So it is with knitting. Yarn for socks or footprints must first of all be strong. To knit the foot, you can use the same threads as for the main part of the footprint, only strengthen them with an additional thread. Which is better to choose? Of course, kapron. This yarn is thin but strong; soft but well shaped. Knitting needles for knitting tracks can be taken standard. The formula is as follows: a thread in two additions, slightly twisted, is equal to the thickness of the knitting needle. And you can take the knitting needles a little thinner than for knitting a blouse or hat. So, we figured out the necessary materials and tools. Let's consider step-by-step instructions on how to knit slings with knitting needles.

Footprints-socks

Knitted socks or footprints should be warm to warm the legs - this is their direct purpose. Someone inserts them into boots or boots, and someone uses them as home shoes. There is an option when the footprints or socks are knitted openwork, from thin threads. Such a product can be safely worn with open shoes in the summer.

The easiest way

There are several variations forhow to knit footprints with knitting needles. Step-by-step instructions are signed in several rows. So:

1. Cast on 7 sts on needles.
2. Knit a strip on 7 loops with front or stocking stitch for the length of the foot + 2 centimeters + heel height.
3. On the edge of the strip, cast on the required number of loops so that the fabric is even. Heel height remains free for now.
4. Loops along the edge of the strip-trace, 1 decrease, 7 loops (middle), 1 decrease, loops along the edge of the strip-trace. Decrease must be performed in each row - both front and back. Also at the end of each rowfor double loopit is necessary to grab the loops along the edge of the tail left for the heel. In the process of knitting, the heel will be formed, and it will not need to be sewn on.
5. When the height of the trace becomes sufficient, close the loops.

You can knit with any stitch, pattern, jacquard. But best of all, such traces sit on the leg if they are connected with a regular 1x1 rubber band. It was the first way how to knit footprints for men with knitting needles. Step-by-step instructions for this method of work are the same for all sizes, it is universal.

Tracks quickly

There are situations in life when you need to do something very quickly. To How to knit footprints with two knitting needles? Step by step instructions will help to do this job very quickly.

1. Type on the needles so many loops that the length of the typed edge is slightly less than the length of the foot.
2. In the first row, divide the loops into two knitting needles - knit the first, remove the second, leaving the thread in front of the loop to be removed. So knit all the loops.
3. In the reverse row, the loops that were removed are already knitted, and the ones knitted in the previous row are removed, leaving the working thread between the two loops.

Knitting in this way allows you to immediately get a double canvas. Knitting removed from the needles will look like this:

To make the tracks sit better, the last few rows need to be knitted with a 1x1 elastic band or add a rubber band thread. For those who are already more or less versed in the knitting technique, such a trace can be made with a decrease in toe, then the product will get a more correct shape. We looked at another option, how to knit the footprints with knitting needles. Step-by-step instructions and a description of the work will help to make the item of high quality and practical. By the way, for double knitting of footprints without decreasing the toe, it is best to take a sufficiently elastic yarn or at least add a nylon thread, which will provide the product with an anatomical fit.

Traditions to the rescue

There is another interesting way how to knit knitting needles. Step-by-step instruction:

1. On four knitting needles, dial the required number of loops (you need to start from the length of the ankle girth).
2. Work 5-7 rows in 1x1 Rib.
3. Then, on three knitting needles, knit the heel: remove the loop, knit the next one, knit all loops in the reverse row. In this way, continue knitting until the required heel height is reached.
4. Next, divide the heel into three parts, knit the middle one, at the end of each row, grabbing the first loops of the left side parts. So the heel will be formed.
5. Pick up loops along the edge of the heel, if necessary, making a decrease in the toe.
6. Knit a foot with any viscous - elastic, braids, satin stitch - for the length of the foot.
7. Finish the sock by knitting three loops together on the sides of the front.
8. Break the thread, pull through the remaining loops, tighten and remove to the wrong side and fasten.

Simple and unusual

Many needlewomen think about how to knit knitting needles. Step-by-step instructions with a description of the work will help you knit unusual home shoes. The pattern is knitted on four needles. For example, on knitting needles No. 3 for size 37-38, dial 60 loops, distributing them evenly, 15 on each knitting needle. Knitting in a circle. The first 6-7 rows should be knitted with a 1x1 elastic band. Then we leave the first three knitting needles without work, and knitting continues on the fourth knitting needle. A "tongue" is created on it with the front stitch for 40-45 rows, depending on the size of the leg. Then knitting continues as follows:

1. 15 sock sts on needle 4.
2. The required number of loops (40-45) along the edge of the tongue + 15 loops of the first knitting needle.
3. 15 stitches on the second needle.
4. 15 loops of the third knitting needle + 40-45 tongue loops.

On four needles in a circle, knit with an elastic band 1x1 10-12 rows (depending on the size of the leg). The next step will be knitting the trace. On the third needle on 15 loops should be knitted so that the last loop of each row is knitted together with the corresponding loop along the edge of the sidewall. If you knit these two loops together, then the trace does not have to be sewn, it is immediately formed. The trace and loops of the fourth knitting needle - the sock - are also knitted together, at the same time closing the knitting. Pull the tail of the thread inside out.

Footprints "Across"

Let's consider another step-by-step instruction on how to knit sleds with knitting needles. A photo of this unusual product is presented below. So cast on 25 stitches. Knitting is carried out in stocking or facial knitting. By the way, you can immediately decorate the tracks, then you need to take the yarn of the main color and additional 1 - 3 colors. So, dial with the main yarn 25 loops on knitting needles No. 3. Knit in any stitch for 2 rows. Then knit 2 rows on 20 loops in a different color. Again 2 rows on 25 loops in the main color. The next 2 rows are colored on 15 loops. This is the whole work: 2 rows on 25 loops of the same color, then 2 rows of shortened colored ones on 20 loops, 2 rows of the main color on 25 loops, and again shortened color 2 rows on 15 loops. This is repeated until a canvas of a suitable size is obtained, so that, by sewing the back seam and the seam of the sole, we get a footprint.

simple truths

Warm and cozy footprints can be knitted in many ways that have been tested by craftswomen. You can come up with something on your own, because knitting is a rewarding activity that gives room for creativity, allowing you to redo mistakes many times. It will be interesting for novice knitters to learn and knit the knitting needles. Step-by-step instructions and photos of such works will always help you choose the right model, understand the principle of operation. It is best to take synthetic or semi-synthetic threads so that they are wearable, not too slippery, but at the same time warm and not sharp. The toe of the footprint is formed by adding or decreasing loops, depending on which side knitting is started from. This, perhaps, is the whole difficulty in working with footprints. The heel and sole can be formed by stitching the finished product. For comfort, the tracks can be decorated with various decor - tie flowers, leaves, sew on buttons or beads. Home shoes are useful to all households - children, mom and dad, grandparents. Yes, and as a small gift, she will always please.

Knitted socks - footprints are especially relevant in winter. They are very comfortable, successfully replace slippers. Original and even exclusive, such “hand made” slippers sometimes resemble cropped socks. The choice of model, its complexity, knitting threads entirely depends on the experience and capabilities of the needlewoman. There are very simple options without seams for beginner knitters. And if you decide to knit a more complex model, then we will try to help you with this! How to knit knitting knitting step-by-step instructions for a master class on several wonderful models for adults and children is accessible and explains in detail all the stages of knitting.

Traces of squares

Sizes: 38-39

We will need:

• yarn, composed of 75% wool, 25% polyamide (150g per 300m) - pink - 100g;
• the same, purple - 100g;
• knitting needles No3,5 and No4.

Pattern:

• garter rice-k: all loops in all rivers. - facial.

Density: on a scarf pattern 21p. equal to 10 cm.

The dimensions of one square are 9cm by 9cm.

How to tie traces from squares - a master class with a description and an assembly diagram

We start knitting footprints from squares with a set of knitting needles 19p. We knit to a height of 9 cm and close the stitch. We make 8 square blanks of each color for one slipper. In total for two traces of 16 pcs. each color. We sew traces from squares according to the instructions of the scheme, alternating colors.

Detailed step-by-step instructions and a master class for beginners will help you knit these interesting home slippers.

We will need:

• sour cream yarn of two colors - 100 g of each color;
• knitting needles - according to the thickness of the yarn.

Patterns:

• persons. smooth surface: in faces. R. - facial, purl. R. - purl sts;
• pattern "Herringbone": we perform according to the scheme.

How to tie footprints with a Herringbone pattern - a detailed master class with a photo

With knitting needles we collect 17p. and knit:
1 row: 8p. - handkerchief. fig., 1n., 1l., 1n., 8p. - handkerchief. rice.;
2 row and all even ones: according to the pattern, yarn over - purl.

A simple model, available for beginner craftswomen, is knitted quickly and looks very impressive due to contrasting stripes. These slippers will successfully replace the child's socks.

Size: for children 2-3 years old.

To knit such slippers we need:

• yarn, composed of 50% wool, 50% acrylic (100g per 200m), chocolate color - 100g;
• the same yarn, yellow - 50g;
• set of toe knitting needles No3;
• hook No3.

Patterns:

• garter rice-k: all loops in all rivers. - facial;
• persons. smooth surface: with circular knitting, all sts in all rows are facial.

Description

We collect with knitting needles chocolate yarn 40p. and straight / reverse knitting 3p. handkerchief rice. Then 2p. yellow thread, 2p. chocolate, 2 p. yellow. Set aside 30p. back and side parts, we work only with the next 10p. front. We knit with garter rice, changing color every 2p. We knit 12 strips (24 rows) and move on to knitting the side sections with chocolate yarn.

We raise 10 stitches along the edges of the strips of chocolate yarn, we take the previously set aside 30 stitches. + 10p. toe. In total we have 60p. Having distributed the loops, we continue knitting on 4 knitting needles. ch. We make 9 rows of chocolate yarn in a circle.

Next we need to knit the sole of the slippers for children. We knit only the central 10p. toe, setting aside the rest of the loops. We work in straight / reverse rows, knitting the extreme loop of the row and the 1st p. of the side part in 1l. Using this master class, we knit until all loops are knitted on the side sections, except for 10p. heels. We turn the product inside out and connect the remaining sts with a hook.

We make the top seam. We tie edge 1 with a row of single crochets with yellow yarn.

We knit footprints in haste with knitting needles: video MK

Children's slippers - socks with an openwork pattern

We knit children's openwork knitting needles: video master class

Socks - slippers with jacquard pattern

Size: 38

We need:

• yarn, composed of 75% wool, 25% polyamide (100g per 420m) red - 100g;
• the same white yarn - 100g;
• the same green yarn. - 100g;
• set of toe knitting needles No2.5;
• markers (M).

Patterns: Density: on jacquard 32p. it is 10cm.

Description

Cast on 72p. white thread and round knit faces. smooth surface, setting M at the beginning of the river. between the 1st and 4th spokes. We do 10.

Track. R.: * 2p. in 1l., 1n. * - from * to * on all points. Then another 3p. persons. Next, go to cx.1, repeating the rapport from 6p 12 times. We knit the 1st p. schemes, then three times with 2p. 7r., then 3r. persons. white thread.

We tuck the edge, making out a jagged border. We knit 1 row. facial, connecting the typesetting row and loops on the knitting needles. It turns out a fold, a double cuff.

We continue by doing 5p. white yarn faces. ch. Decrease 1 st at the same time. on the 2nd and 4th sp. Total - 70p. We continue to work only on the 1st and 4th joint, knitting the heel lift. We make straight and reverse rows, in the 1st purl. R. knitting out. n., we decrease at regular intervals 3p. In work 32p. Track. p .: 2l., * remove 1p., thread behind the canvas, 1l. * - from * to * repeat until the end of the p. According to this scheme, we knit all the front rows, and purl. rows knit purl. We knit only 34r. and then 1 more.

Master class on the design of the heel

We knit according to the figure, facial to the extreme 11p., 1 broach (remove 1p. front, 1l., thread it through the removed one), turn the work. We remove 1p., 10i., 2p. in 1i., turn. We remove 1 p., faces. to the extreme 10p., 1 broach. We continue according to this algorithm, making decreases 1p. in every r. until only the center 12p remain. We distribute the loops on the 1st and 4th sp. 6 pieces.

We raise 17 l along the edge of the heel lift. and 1 more p. between the 1st and 2nd sp. We knit them for the lower slices and 6p. heels, knit loops of the 2nd and 3rd knitting needles, raise 1p. between the 3rd and 4th knitting needles, 17p. along the edge of the heel lift, we knit them for the lower lobules, 6p. heels. Total 83p. Next, we work according to cx. 2, performing reductions.

At a height of 19cm from the first decrease in the heel, we start at 17r. reductions for toe design - see diagram. We continue to decrease, having finished knitting the strawberries at 24r. Finish knitting the toe with white yarn:

1st and 3rd knitting needles: knit to extreme 3p., 2p. in 1l., 1l.;

2nd and 4th knitting needles: 1 l., 1 broach, faces. to end.

We repeat the decrease in even p. until you get 10p. Break yarn, thread through remaining sts.

Knitting slippers: video MK

Every year sleds become more and more popular. They are used as home slippers, as it is convenient, practical and very beautiful.

If you want to learn how to knit beautiful footprints on two knitting needles, then this article will become your reliable assistant in this matter.




for knitting home footprints (2)

You can see other options here for knitting home footprints (3)
As for the knitting technology itself, there are three of them:

1. The first involves the beginning of knitting the product from the sock. The minimum number of loops is recruited, then with the help of the crochets, the number of loops increases.
2. The second is knitting from the top (heel), which goes down to the toe. Such footprints are knitted according to the principle of socks.
3. The third is transverse. With this technology, the footprint is knitted from one edge to the other, after which it is sewn.

How to knit footprints on two knitting needles for beginners with a photo

• Thick yarn for the base.
• Thin yarn to decorate the teeth.
• Knitting needles No. 4 (in our case, circular).
• Needle and thread for stitching.