How to fold an origami paper crane. Japanese crane, detailed origami scheme

A couple of days ago I told, as well, and now I'll tell you how to make a paper crane with your own hands. The craft requires care, as well as a sheet of A4 paper, ordinary scissors, and you can even take glue. This craft is educational for children, and for adults it’s just interesting. The photos show everything step by step, but I will make mini comments that will definitely help you in the manufacture.

I will say right away that all photos are exclusive!

So, how to make a crane out of paper.

1. We fold a sheet of A4 paper at an angle.

2. Cut off the excess part so I make a square.

3. Turn the square into a triangle, fold it diagonally. On the fold of the long side we draw a head with a neck.

4. We make small cuts along all edges. And we leave the tail part not so fluffy.

5. This is how the workpiece will look like.

Be careful! We draw the head and neck of the crane on both sides.

6. Cut through the head. Our crane will turn out fluffy.

7. To finish the paper craft, bend the wings and attach them to the tail, you can even drop a little glue.

Such a crane is done in about 10-15 minutes, if you have trained, then you can do it faster. If you are a fan of homemade origami, then this article will come in handy for you and you will replenish your collection. This craft can be said to be unique, as it was invented recently and a Master class was shown to you.

The crane is the most popular origami craft. It is recommended to start mastering this technique from it. In Japan, there is a belief: by folding 1000 birds out of paper, you can make your cherished wish, and it will certainly come true. Paper origami crane includes all the basic elements of addition. This craft has several options, but the main one is always a double square.

On the basis of a double square, you can make many different crafts. An origami paper crane is always made using this module.

The step-by-step addition scheme looks like this:

1. Take a sheet of A4 paper and bend its corner to make a flat strip at the bottom. Cut it off.
2. You have a square folded diagonally. Straighten it, fold it in half vertically. Repeat horizontally.
3. Straighten the workpiece again and outline the second diagonal: fold it at a different angle.
4. You should have 4 fold lines. Fold the square along one of the diagonals, put the corner down.
5. You will see outlined lines forming a square within a triangle.
6. Along these lines, bring the free corners of the large triangle into the figure. Assemble the square.

These simple steps have allowed you to get a blank for cranes. A child will cope with its manufacture. To be able to make this module is also necessary for adding other figures. If you are teaching origami techniques to children, then start by making double squares. When they learn how to make neat blanks, tell them how to make an origami paper crane.

In the origami technique, paper cranes for beginners have beautiful wavy wings. With this option, it is recommended to start classes with children from 5 to 8 years old.

Instructions for doing crafts (step by step):

Now you know how to make an origami paper crane. When assembling it, complex techniques are not used, so it is good to start teaching children with this craft. For beginners, it is important to do all the folds slowly, carefully. Follow the step-by-step work plan so as not to get confused.

Haste in the manufacture of crafts is fraught with errors and violations of proportions.

graceful crane

The following popular scheme will help you make a bird with a thin neck and a long, sharp tail. This is another simple origami paper crane.

Scheme for beginners:

1. Take the finished double square.
2. Make folds on its sides, bending the corners of each layer towards the center. Bend the edge of the resulting rhombus towards you.
3. Expand the resulting triangle by raising the corner of the top layer. Repeat the procedure with the second layer.
4. From the bottom, bend the right corner of the top layer to the center, repeat the procedure with the left side.
5. Bend the bottom corners of the rhombus so that they stick out to the sides. Then move them inside.
6. The result was a blank resembling a lotus. Bend any of its narrow petals at an angle of 90 degrees to form the bird's head.
7. The wide part will be wings, stretch it in opposite directions.
8. Leave the last thin triangle intact - this is the tail.

This paper crane is easy to make. The younger student will cope with it. It will take no more than 10 minutes to work, taking into account the manufacture of a double square.

flying model

The most popular craft option is the one that can move. It's simple, but the kids love it. It is often done in the classroom in DPI classes.

Origami of their paper "Crane" assembly diagram:

1. The main craft is not a double square, but a straight rhombus, which is made according to the instructions for the previous model.
2. Fold the right side of the diamond to the left, make a movement as if you were flipping through a book in the opposite direction.
3. Iron the fold, repeat the technique. You will get a rhombus, the upper part of which is a halves.
4. Stretch these halves.
5. Bend each layer of the lower petal up and iron.
6. Turn one of the narrow parts into a head, for this you need to push the corner inward.
7. Pull the upper corners slightly to the sides, you will get wings.
8. To make the craft move, pull it by the tail.

This toy has a rich history. It was made in solidarity with Sadako Sasaki, who became ill with leukemia after the bombing of Hiroshima. She wanted to make 1,000 crafts to get rid of her illness, but she didn't have time. At the time of her death, only 644 birds were ready, the rest were made by her friends for Sadako.

The story of this girl was filmed in the USSR in the film "Hello, children." Since 1955, the origami paper crane, whose scheme provides the illusion of flight, has become a symbol of rejection of the use of nuclear weapons.

Festive Crane

On some solemn occasions, craftsmen in Japan make special birds. Beginners should not try to fold this figurine, they need to get their hands on simple options first. To decorate the interior or gifts, you will need the following origami paper crane, in stages it is done as follows:

1. On a double square, mark the folds: fold the corners to the center on one layer. Bend the top corner and straighten the square.
2. Straighten the workpiece and fold it so that the triangles converge at the bottom.
3. Press on it with your finger, point inward. Straighten the workpiece. It will look like a truncated rhombus.
4. Peel back the top layer to get a boat.
5. Expand the figure into a sheet, bend the obtuse corners in the opposite direction. Fold the petal along the intended fold line.
6. Press the sheet on both sides so that the corner itself refuels inward.
7. You have an irregularly shaped figure. Its triangular part is the future tail. Bend the top half in half so that it takes on a flattened shape.
8. For the received part, fold one part in the same way as in the previous step. Repeat the addition with the second piece.
9. Turn the figure over and continue to fold the parts in the same way as in the previous description.
10. You got a folded tail and a narrow part, which will be the head and body of the bird.
11. Bend the narrow part in half, form the head. Give volume to the crane.

Following this step-by-step plan, you will make a craft that will decorate the table or gift boxes. It symbolizes happiness and prosperity. A beautiful ribbon is often tied to this figurine to hang on the Christmas tree. Make a figure out of thick paper with a pattern that is used in scrapbooking.

Translated from Japanese, "origami" means "folded paper", in the land of the rising sun, the art of origami is called the art of a whole sheet. This is one of the most important rules of origami - do not add or subtract anything extra. This is the law that all origami artists have followed for centuries. Thanks to this, this type of art has been considered the most unusual and original for thousands of years.

Origami appeared almost immediately after the appearance of paper in Japan. It was the Japanese, and not the discoverers of a new writing material - the Chinese, who guessed to use paper as a raw material for decorative ornaments and products. At first, the new exquisite and valuable material was used in various religious ceremonies.

Perhaps it was in order to awaken the curiosity and cravings of new students that origami masters came up with various stories - legends about the importance of origami in human life and history in general. The most important and famous legend about this Japanese art is directly related to the most significant and important origami figurine - the paper crane.

In the countries of the East, the crane is considered a symbol of love, faith and hope. Since ancient times, people have believed that if you make a thousand of these figures, and then give them away to all your relatives and friends, then the most cherished desire will come true.

To make an origami crane you will need:

To start folding an origami crane according to the scheme, you do not need to buy any special tools or expensive materials. Just a sheet of plain paper is enough, as long as it is strong and flexible enough, otherwise tears will occur when folded.

Step-by-step instruction

Step 1:

Take a square piece of paper of any color and fold it diagonally, then vertically. Straighten the upper triangle into a square.

Step 2:

From the open edge of the square, fold the right and left edges towards the middle. Turn over, repeat the same on the other side. We bend the top in any direction and squeeze it well.

Step 3:

We open the finished workpiece and make a boat along the fold. Turn over, repeat the same with the other side.

Step 4:

We take the moving part of the workpiece and bend it to the middle. Turn over, repeat the same with the other side.

Step 5:

We bend the resulting legs diagonally: one part will be the head and the other - the tail.

Step 6:

We unbend the future tail, push it apart from the side and bend along the fold in the middle. Do the same for the head.

Step 7:

Let's make a crane's head. Bend at a certain height, at what you like.

Step 8:

It remains to make the belly of the crane. Gently pull the wings in different directions. The crane is ready!

Done, turning an ordinary square piece of paper into an elegant bird looks like a real miracle! Good luck to you!

Origami crane is one of the most popular paper origami. If you do not know how to make an origami crane, then on this page you will find everything you need to assemble this simple paper figurine.

In the first photo you can see what you get if you follow the assembly diagram below. The second photo of the origami crane was taken by one of our site users. This origami is also made in a similar way. If you have photos of the origami you have collected, send them to the addressThis email address is being protected from spambots. You must have JavaScript enabled to view.

Assembly diagram

Below is an origami crane assembly diagram from the famous Japanese origami master Fumiaki Shingu. If you strictly follow the instructions, then the assembly of the origami crane will not take much time, and the result will be the same as in the picture. After doing what is described in the diagram several times, you will understand how to make an origami crane quickly and without peeping into the diagram.

Videos master class

Assembling an origami crane for beginners can seem like a daunting task. Therefore, we advise you to enter the query "origami crane video" on the largest video hosting site on the Internet YouTube. There you will find many different videos of origami crane, which clearly show the steps for assembling the crane. We hope that after watching the video of the assembly master class, you will have no more questions on how to make an origami crane.

With the help of this video tutorial, you quickly learned how to assemble an origami paper crane:

Symbolism

The crane is considered to be a symbol of happiness and well-being, as well as a lofty unattainable dream. In many cultures, the crane is also a symbol of hope for the best. For some, the crane is a symbol of peace, similar to the dove.

In this master class, I will show you how to make a do-it-yourself origami crane with step-by-step photos. It's no secret that in order to master a new creative skill, you need to start with the basics and create simple models. A crane is perfect for this. You can easily make it and make it a new element of decor.

Please note that children can also create such a model, since for this it is only important to carefully and carefully make the necessary folds. And in order not to confuse anything, you need to strictly follow the scheme and recommendations presented below, and you will definitely succeed!

How to make an origami crane

For a long time, people have associated the crane with love, happiness and health. This symbol was created from a variety of materials, and paper was far from last among them. The origami technique was also often used to create cranes.

At present, there are a lot of folding schemes for this model, which, on the one hand, speaks of its popularity, and on the other hand, the difficulty of choosing a really good and beautiful option. Our article will help you make the right choice and create your own symbol of happiness. see here.

01. Classic version

A step-by-step creation of such an origami crane is given in this master class.

Take a square sheet.

Fold it as shown in the photo.

Then fold over the edges.

Make a triangle.

And fold again.

Then wrap one corner of the triangle, and then the other.

Bend the edges of the resulting rhombus. Then turn the shape inside out as shown in the image.

Do the same on the other side.

Fold the edges over again on both sides.

Bend the edges. This is the head and tail of a crane.

Make a beak.

Spread your wings. The origami crane is ready!

Such products can be used not only when working with children, but also as room decor, for example, for a wedding or for a photo shoot.

02. Crane for good luck

Using the origami technique, you can make a huge number of models of animals and birds. Over time, their varieties only become larger, but the most common among them was and is the crane model. I present another option - how to make a paper crane.

To make it, one square sheet of paper is enough.

First, fold the sheet in two transverse directions.

After that, we make diagonal folds on the sheet, but in a different direction.

We fold the sheet in the form of a double square due to the existing folds (the top of the fold of the workpiece is directed upwards).

At the top layer of the resulting square, we bend the sides.

Now they need to be straightened.

And fold in the form of an elongated rhombus.

Flip over and repeat the same. The result was a blank, which is called "Bird".

Turn the left side of its top layer to the right.

The right half of the bottom layer needs to be turned to the left. Now the blank of our crane has changed a little. From its upper part you get a head and tail, and from its lower part - wings.

Let's start by creating one wing. To do this, bend the lower triangle up.

Then we make a fold down, combining the edges with a horizontal line.

We perform another fold up.

Fold down again.

It remains to perform 2 more folds to form the wing.

One wing of our origami crane is ready.

On the other hand, using the same folds, we make another wing.

This is how our bird should look from above at this stage.

In its front part we will form a head, making an inner fold.

Our origami crane is ready.

03. Origami crane with spread wings

The art of origami originated in Japan, as they say, even at the time of the creation of paper. In the future, it became especially appreciated by Japanese aristocrats. After all, through these paper figures it was possible to convey various wishes and show respect to the recipient.

As for our country, the art of origami is of particular interest to children. They are completely given to the process of creating a new toy. The handmade paper birds and flowers must have sparkled in your eyes as a child too. To create this crane, you only need a square piece of paper.

First, fold the sheet along two diagonals.

Then we make transverse folds, but in the other direction.

Due to the folds obtained, we fold the sheet in the form of a double square, its open sides facing down.

At the top layer of the workpiece, we bend the side corners to the midline. From this part we will further form the neck and head of the crane.

Fold the top corner down.

Let's straighten the folded figure.

Now you need to give it the shape of an elongated rhombus.

Turn the workpiece over to the other side and rotate it a little.

Let's start forming the wings of the crane. To do this, on the right side we make folds from the sides. As a result, we got 2 folds.

Now each of them needs to be straightened. We start from the bottom.

Straightening it, we change the outer fold to the inner one. As a result, from one fold we get two.

We do the same with the fold on the other side. At this stage, we have 4 folds (2 on each side).

Now from each fold you need to make two again. To do this, we fold each of them towards each other.

After that, we straighten the folds (change the outer ones to the inner ones) and form new folds.

We repeat the same with another fold - we lay them out and make oncoming folds.

As a result, we should get 4 folds on each side.

This is what the crane blank looks like at this stage.

Bend the protruding corner to the right side.

Let's turn the crane blank to the other side.

On the left side, make a fold at a right angle, but not to the end (smooth the fold only to the level of the horizontal line).

Now we will perform a similar fold in the upper part. So we outlined the folds necessary to form the crane's neck.

Let's give the blank of our bird the following look. To do this, its right side needs to be folded lengthwise, while the left side is placed vertically.

On the plane, the future crane looks like this.

Bend the upper part on the left side at a right angle.

In this place we will make an inner fold.

It remains to form the head of our bird. To do this, bend the tip.

We make folds inward, we get the head of a bird.

Our crane is ready.

Classic Japanese version

Origami paper crane with legs

Cranes in Japanese mythology

In Japan, this graceful bird is a symbol of long life and hope. It is interesting that in ancient times the Japanese made such figures, giving them certain meanings and emotional coloring. In the future, this art began to spread among other countries, gaining worldwide fame and admiration.

As you can see from the story, in order to make a symbol of happiness with your own hands, you do not have to be born and raised in Japan for this. Anyone can understand and reproduce the scheme of its creation. A distinctive element of the paper crane is its thin and long neck.

In Japan, there is a belief that the one who folds a thousand paper cranes will surely fulfill his cherished desire or this person will be cured of all ailments. Over time, this bird also began to symbolize the world.

Many people know the song "Japanese Crane" about the amazing events that happened during the Second World War. This song is about a girl, Sadako Sasaki, who got radiation sickness from the atomic bomb in Hiroshima. She believed that a thousand folded paper cranes would help her heal.

However, she managed to make only 643 origami models, she died, having lived to be only 14 years old. The remaining 357 cranes were laid down by her friends.

Cinematography also did not leave this sad story aside. The Soviet film “Hello, children” introduced the viewer to her. After these events, the paper crane became a symbol of non-acceptance of the use of nuclear weapons. In Japan, there is even a monument to Sadako Sasaki, and her story still excites people from all over the world.

What value and significance the crane would not have as a symbol of health and longevity, at present he himself is in dire need of help. The Japanese are making great efforts to prevent the extinction of this bird, so that it will continue to inspire people with hope for a better future, happiness and peace.

We really hope that our recommendations will help you make your own crane, which will surely turn out to be happy. Start folding origami of this beautiful bird, which is not only striking in its beauty, but also in symbolism. Maybe you can even make a thousand origami cranes and your cherished wish will also come true.

How to do it - see here.