How to make wolverine claws from iron. How to make claws from paper and other scrap materials

Making a cardboard base

In the same way, you can make claws from metal, but this will require a certain number of metalworking tools. In addition, metal claws are dangerous. The ring on which the claws are attached will also be metal.

We paint, fasten, varnish

It is better to take threads from polyester or nylon.

Many characters in modern and older films have various iron claws on their hands, such as Freddy Krueger or Wolverine. And many of the children would be glad to have such claws for their games. Of course, no one is suggesting making metal accessories for them to play with; such attributes can be made from safer materials. In this article we will try to figure out how to make paper claws.

How to make paper claws like Wolverine from the X-Men

Take a landscape sheet of A4 format.

Fold the paper as if you want to make a square out of it.

Now we bend the resulting corner to the left to make a triangle.

Fold the lower right corner towards the center.

Bend the left corner in the same way.

Fold the piece in half to form a triangle.

Now fold the resulting figure in half again, and then straighten it.

The left edge of the workpiece must be bent towards the center as shown in the photo.

Fold the same part of the workpiece in half again.

And for the third time.

In the upper part of the workpiece you need to make a recess and insert a free corner there, you should get a part like in the picture.

Now there, in the upper part of the workpiece, spread the paper and make a recess.

Make 4 or 9 more of these shapes, put them on your fingers , and now wolverine claws appear on your hands.

Claws like a lynx

Take a square piece of paper and fold it diagonally.

Unfold the sheet and bend the lower left corner to the fold line.

A triangle has formed at the top of the part, bend it back.

Now bend the left triangle to the right again.

Bend the right triangle to the left, and place its edge in the pocket.

Open the claw and put it on, everything is ready.

The scheme of such a craft is not at all complicated, and if you do everything step by step, the result will be wonderful.

These two methods of creating claws from paper are the most common, the first option is perfect for the image of a wolverine, and this craft would be quite suitable for Freddy Krueger’s claws, they are long enough for this. Such claws can be made from colored paper, gray, or metallic. They can also be painted using gouache of the appropriate color for greater realism. And also stick foil on the finished claws. This addition to your Halloween costume will look amazing.

The second version of the claws looks like those of a cat or lynx. This option is also perfect for a carnival costume. The claws can be made from white paper and then painted in the desired color, or immediately use colored paper.

Carefully follow the order in which the crafts are created, this is necessary so that they move and look like real ones. If you want your craft to last longer than one day and be quite rigid, then it is better to use thicker paper; office sheets will not work in this case. You can also make the claws even longer if you put another one on the first one, but in this case it will be better to fasten them together with glue.

Long paper claws:

Lynx claws made of paper:

Paper claws like Wolverine:

You can make such crafts with your own hands in many ways, the main thing is patience and your imagination, use various techniques and elements to strengthen and give the finished products a more natural look. Guided by these simple rules, you can create excellent layouts for games or themed parties, and you will not go unnoticed.

In order for the carnival costume to be perfect and perfectly match the chosen image, you need to carefully take care of even the smallest details. For example, in order to realistically appear as a mutant or an evil predator, you need to inquire in advance about how to make claws from paper or other materials, and select all the necessary blanks.

In order for the carnival costume to be perfect and perfectly match the chosen image, you need to carefully take care of even the smallest details

Making crafts using the origami technique is very easy and simple. Even a child can cope with this task without much effort. A claw that completely covers the finger can be made according to the following scheme:

1. An A4 sheet is folded first lengthwise, then crosswise, and then unfolded.
2. Cut the paper along the fold lines.
3. One of the resulting triangles is placed with the short side towards itself and the corner is folded.
4. The lower part is cut off with scissors to form a square.
5. Place this square, directing the corner towards you.
6. The right side is folded towards the center line.
7. The workpiece is turned over and the corner is slightly bent to the fold line.
8. Turn the paper over to the front side again.
9. Bend the right side and thereby form a triangle.
10. The left side is now turned to the right and thus the corner is hidden in a “pocket”.
11. Straighten the claw and make it voluminous.

Using this principle, paper claws are made for all fingers.

Gallery: paper claws (25 photos)

Paper claws (video)

How to make claws like Wolverine, a dragon, a predator

There can be no difficulties in this case; the manufacturing process is described in stages:

1. A sheet of A4 format is placed on a flat surface and the upper right corner is folded to the left to form an acute angle, with the upper edge aligned with the left.
2. The sharp corner is folded towards the base, the uneven edge is folded towards the center.
3. The resulting square is folded diagonally to form a triangle.
4. The right angle is directed upward.
5. Find the combined edges and unfold the triangle, folding the edges.
6. The sheet is aligned along the fold.
7. This figure is folded in half lengthwise.
8. The shape is fixed by turning the outermost corner inward.

To create the claws of a real predator or dragon, you need to follow the following instructions. For manufacturing you need the following tools:

• scissors;
• pencil;
• glue gun;
• dye;
• paper.

Armed with everything you need, you can get to work:

1. A sheet of paper is folded into the shape of a triangle, the edges of another triangle are drawn and cut out.
2. The resulting template is transferred to thicker paper and the required shape is cut out.
3. Roll it into a cone shape.
4. Draw a couple of diagonal lines on the cone and cut it.
5. Consistently fold all the parts at an angle into one another and glue them together.
6. Paint them with paint.

In this form, the claws will be similar to those that can be seen on a cat or lynx. If you glue them to the gloves, they will begin to resemble the hands of Freddy Krueger.

DIY claws made of iron or wood

Iron and wooden claws like those of Wolverine or Shredder can only be made if you have all the necessary tools. It is strictly forbidden to make them for children, since this is not a toy at all, but a real weapon.

During the work process, you don’t even need a drawing if you strictly follow the instructions:

1. Claws in the shape of a boat are cut out of metal or wood.
2. Holes are made in each specimen.
3. All parts are put on the ring and tightly fixed with glue or using a welding machine.
4. Attach the finished craft to a thick leather glove.

How to make claws from cardboard or plasticine

The claws look impressive when they are made using cardboard rather than ordinary paper.

To make them, you will need the following materials:

• cardboard;
• glue;
• spoke or rod.

Manufacturing is carried out as follows:

1. Each A4 sheet of cardboard is cut in half.
2. Using a knitting needle or rod, the cardboard is twisted, starting from the corner.
3. After this, it is straightened to form an elongated bag, narrowed on one side and widened on the other.
4. The edges are glued together.
5. Cut off one third of the cone and cut it a little.
6. Cut the remaining part in half.
7. All parts are glued together.

An even simpler way to create the main accessory of a costume is using plasticine:

1. Plasticine is rolled out on a board in the form of a thin square.
2. A cone is made from a square.
3. The resulting cone is bent in two places.
4. Place the claw on your finger.

DIY glove with claws

It’s not just the claws that look much more impressive, but the glove on which they are attached.

The process of making such a glove is not that complicated, you just need to arm yourself with everything you need:

• thin glove;
• paper;
• pencil;
• faux or natural fur;
• plastic claws;
• threads;
• scissors;
• glue.

The production of gloves is carried out in several stages:

1. A template of the future glove is drawn on paper and immediately cut out.
2. Using this template, a part for the future glove is cut out of fur.
3. Sew the fur to the front of a regular glove.
4. Using glue at the joints of the gloves and fur, the claws themselves are glued.
5. After the glue has dried, try on the glove.
6. That’s why they sew the second one according to the same principle.

The result is not just animal claws, but literally an entire paw. Naturally, the costume will look very realistic and will be remembered by everyone for a long time.

Another option for making a glove can no longer be called childish. These are real Wolverine claws, made of leather and metal. For this glove you will need:

• leather;
• yarn;
• iron sheets;
• rivets;
• scissors;
• awl;
• Bulgarian;
• punch;
• welding machine.

In order to make such a glove, you must do the following:

1. The outline of the hand is drawn on the leather scrap and cut out.
2. Thinner pieces are joined and riveted. You will need to place your fingers in them.
3. They make a pair of straps that will secure the glove in the wrist area.
4. Six claws for the glove are made from metal.
5. The claws are fixed on a metal plate.
6. The claw plate is riveted onto the leather glove.

How to make Wolverine's claws (video)

Claws using papier-mâché technique

You can make claws out of paper in several ways, but they are most realistic if they are made using the papier-mâché technique.

At the same time, a monster costume will cause much more delight than a ninja outfit, even if the hero is armed with bladed weapons and all the necessary accessories. And all because he has ordinary nails, and the monster has real, terrifying claws.

In order to make such an unusual craft you will need:

• toilet paper;
• putty for drywall;
• PVA glue;
• flour;
• wire or plastic rings;
• sandpaper;
• paints;

You can make the main weapon of a monster as follows:

1. Plastic rings are selected precisely according to the size of each finger, or their likeness is made from the most ordinary wire.
2. Toilet paper is torn into very small pieces and filled with fairly warm water.
3. Squeeze the paper pulp out of the water and measure out the required amount.
4. Putty, flour are added to the paper pulp and glue is poured.
5. Mix all the newly added ingredients together. If necessary, add a small amount of water.
6. Each claw is modeled from the resulting paper pulp, sticking paper onto rings and creating the required shape. At the same time, they try to make the size a little larger, since the paper will shrink noticeably when drying.
7. The material is given time to dry. This requires at least 36 hours.
8. Only after the products have dried are they carefully sanded with sandpaper, thereby adding even more realism.
9. The sanded products are covered with glue and left to dry for four hours.
10. After this, the claws are covered with white paint and allowed to dry.
11. Next, bronze paint is applied, and time is also allowed for it to dry.
12. Finally, the products are coated with varnish.

The process of making claws in this way is very painstaking, but it is in this case that the desired result can be achieved. Real monster claws are made from ordinary paper.

To make your own claws, you can use not only paper, but also cardboard, plasticine, metal or wood. It all depends on who this carnival accessory is intended for and what effect should be obtained. If a costume is being prepared for a children's party, then paper will be the ideal material; products made from it are the safest and simply cannot injure anyone. Teenagers can make such an unusual costume detail from cardboard. It is more durable and can remain intact until the very end of the party. Only adults can use metal or wooden claws in addition to the suit, but even they need to be as careful as possible so as not to injure themselves and others.

Glove with claws (video)

Whatever option is chosen, such a costume will be a colossal success, because not everyone knows how to make claws on their own. In fact, this process is simple and does not require special skills or knowledge.

If Halloween is approaching and you decide to appear at the holiday in the image of Wolverine from the acclaimed movie “X-Men,” then one of the main attributes of your costume should undoubtedly be long claws. If you were unable to find them in stores, then you can easily build them at home. We will tell you how to make wolverine claws with your own hands in our article. Even if you have never been into crafts, don’t worry, since building this attribute is not at all difficult.

How to make wolverine claws from paper

This method is certainly the simplest. For such a craft, you only need a few sheets of the most ordinary A4 and scissors. Instead of plain paper, you can use colored cardboard. This option is even better, since the claws will only be stronger. Prepare paper at the rate of one sheet per claw.

Manufacturing process

Using scissors, we make a square from a horizontal sheet. Place the paper on a hard, flat surface. The upper right corner of the sheet must be folded towards the left side (it is necessary that a small strip of paper remains under the fold). We bend the upper left corner of the already bent piece of paper to the lower left corner. After completing these steps, you should have a triangle that needs to be aligned with the left side of the workpiece. Now you need to turn the figure into a square by bending the right side of the sheet, the top of which is located on the fold of the triangle, to its left side. The result of this operation should be a vertical fold.

We fold the resulting square diagonally and get a triangle. After this, we place the workpiece on the table and mark with a pencil from top to base a bend line perpendicular to the base of the triangle. Then we bend the edges of the triangle to this line, resulting in a rhombus.

In order for your craft to take the shape of wolverine claws, you need to repeat all the above steps two more times. Try to approach the process with the utmost care and precision so that the result of your work does not become a disappointment. All folds must be done accurately so that your craft is durable.

The last step in making the claw is to secure the resulting shape. To do this, we wrap the remaining paper edges into the hole located in the back of the structure. The resulting small pocket will serve to put the claw on your finger.

So, your main attribute for a fancy dress is ready! Now you know, Despite the fact that in words the process of creating this craft looks quite complicated, in reality everything is completely different. By spending a few sheets of paper and a little time, you will be able to achieve an excellent result.

How to make wolverine claws: other methods

Of course, paper and cardboard are not the only materials from which this attribute can be constructed. If you, for example, have wood carving skills, then you can easily build claws from wood. A more complex way is to make such

Is Halloween or New Year approaching, or have you and your friends decided to just have fun and throw a party with zombies, mutants and other horror movie heroes? Then you can't do without a fancy dress. What makes a costume masquerade? That's right, details.

Little things- masks, gloves, and other tinsel give the robe a special flavor. And if you decide to become Wolverine, a follower of Freddy Krueger, a crazy zombie or a wild predator, you cannot do without claws, even paper ones. They are easy to make - you just need a little time and patience, as well as a simple set of materials.

What you need to make paper claws:

Paper. It can be either a regular office A4 format or a thicker one. Each of these options has its own advantages and disadvantages. Plain paper is easier to fold and bend, but less durable. Dense material is more difficult to work with, but products made from it will last longer.

Ruler, pencil.

Glue - for those options where the folds need to be glued.

Scissors.

Gouache or acrylic paints - if you are making claws from white paper and want to give them the desired color.

It is better to make claws on a table or other hard surface with enough room to maneuver.

After studying the presented instructions on how to make claws from paper, you can easily create such a “formidable” accessory for your costume.

Option #1.

The basis of any origami-style paper product, and paper claws also belong to this type of art, is a square. Therefore, if you have a rectangular sheet, you can trim off a few extra centimeters or bend them inside the product.

1. Take a sheet of paper and bend it diagonally in half. Draw a ruler or pencil along the fold line to clearly mark the line. Unbend the sheet.

2. Expand the square. We bend the two sides to the fold line made in step 1.

3. We bend the resulting triangle in half, passing along the middle line of the fold.

4. The result is another triangle. On its longest side we mark the middle - put a dot with a pencil. From this point we mark a segment to the opposite vertex of the triangle. Along this segment we bend the lower part of the triangle.

5. We wrap the bottom part of the triangle around the two sides, and tuck the remaining tip inside the claw.

6. Straighten the resulting claw.

Video. How to make claws out of paper?

Option No. 2

1. Draw a triangle on a piece of paper. This will be the template for the future claw, so you need to make it as long as your claws will be. Also, the base of the triangle must be of a suitable size. To do this, you need to measure the circumference of your fingers and take this size as a basis. Consider whether you are going to simply put the claws on your hands or glue them to gloves - in both cases the size of the claws must be appropriate. Also keep in mind that you need to add about 5 mm to the seam allowance - glue the sides together.

2. We cut out the resulting template and use it to draw the contours onto the cardboard. We cut out the resulting triangle, roll it into a cone and glue the sides together - for this we added 5 mm to the width of the base.

3. Leave the cone for a few minutes for the glue to dry.

4. When the cardboard is dry, we will make two diagonal marks on the cone - along these we will cut it into three parts. This is best done with a sharp utility knife, but if you don’t have one, scissors will also work.

5. Cut the cone into three parts.

6. We insert these parts - one into the other, in the same order in which they were connected before. Please note that they need to be inserted at slight angles, otherwise the desired effect will not be obtained. Connect the “joints” with glue.

If you still don’t get the size right, the claws can be trimmed to the desired size so that they don’t fall off. You can also stick them on gloves - it will be more reliable and effective. In order to glue the glove and claw, put on the glove, apply glue to the inner surface of the claw and put it on the signet. We wait until the glue hardens. Here it is also worth paying attention to the details. If the gloves are made of leather, leatherette or rubber, you can glue the parts directly on the hand - the material will not let the glue through. If the gloves are made of fabric, it is better to put them on a pencil and use it to glue the claw.

The final stage is to paint the claws with gouache or acrylic paints.

Option #3

For this option you will need sheets of square paper. It's easy to do - place an A4 sheet of paper in front of you as if you were going to insert it into the printer. Take the top corner of the sheet in your hand, and pulling it to the opposite bottom side, bend it diagonally. The result should be a right triangle and a protruding edge of the paper. This edge needs to be trimmed.

1. We bend the resulting square in half so that we get a right triangle.

2. Fold the resulting triangle diagonally. As a result, it should become isosceles.

3. We bend the triangle diagonally again, starting from the top point. The bottom point of the fold is between the two bottom sides.

4. We position the triangle so that its sharp part is on the left side. Draw a line from the top of the tip of the claw to its base and turn a smaller angle to it. Having ironed all the folds, we unfold the last one.

5 . If you follow the steps correctly, you should end up with a claw that is comfortable to put on your finger.

Option No. 4

This option - how to make claws out of paper - is simple, requiring virtually no material costs or special skills.

1. Take an A4 sheet and make a square out of it.

2. Fold the square in half to form a rectangle.

3. We also bend the rectangle in half. As a result, we will get four identical squares. We cut them along the fold lines. The square obtained in this way will be the basis for one claw.

4. Fold the square in half diagonally to form a triangle. Iron the fold.

5. We unbend the triangle, we get a square with a fold line.

6. We lead the left corner from the fold line to the middle of the square so that the side of this corner is parallel to the fold line.

7. We bend the lower part in the opposite direction. We should end up with an irregular triangle.

8. We bend one side, which has the shape of a triangle, into the middle towards the main fold line - and we get another triangle.

9. We tuck the right corner of the triangle into the “pocket” of the left side. Once again we go along the fold lines and straighten the claw.

Video. How to make paper claws for your fingers?

Option #5

If you're a fan of the X-Men movie, and Wolverine in particular, you can get his famous claws. Of course, they are unlikely to help you in battle, but they will be just right for creating an image at a party.

The set of materials is slightly different from previous options. To make Wolverine's claws for one hand, you will need:

6 sheets of A4 paper;

Narrow tape;

Scissors;

Electrical tape (can be replaced with tape).

Let's get started:

1. Lay a sheet of paper horizontally.

2. We bend it in half and draw along the fold line to mark it more clearly. Unbend the sheet. The sheet is now divided into two parts. In relation to us it will be upper and lower.

3. We also bend the lower part in half, but so that 5 mm remains from the edge of the sheet to the fold.

4. We unbend the sheet again - now there are two fold lines on it.

5. We bend the very bottom part of the sheet in half in relation to the bottom of the fold. We fold it 2 more times - to the middle of the sheet.

10 . We iron the folds well and level them. We got two fold lines. Using scissors, cut the edge of the paper along the top lines.

11. Fold the remaining edges again and fold the sheet in half. Glue the two edges - the bottom and the cut edge - with tape. We don't touch the third one.

12. We round off the sharp end of the resulting “arrow” for safety reasons. We need to make a total of three such blanks.

13. Take a sheet of A4 format. We bend the lower right corner and begin to twist it into a tight tube diagonally across the sheet. Secure the tip of the sheet with tape.

14. We turn the edge of the tube four times - it looks like a snail shell. We wrap this “snail” with tape so that it does not unwind.

15. In the same way we make two more sticks.

16. We connect them with tape so that it is convenient to hold between your fingers. We strengthen them with tape or tape.

17 . We got a trident from connected sticks and three arrow blanks. We take one piece at a time and put it on a stick with the cut edges down.

18. We strengthen the joints of the blanks and sticks with tape. Ready!

For a better understanding, you can watch the video.

Video. How to make Wolverine's claws out of paper?